XINCOL EPS Multi-function Car Jump Starter Battery Booster with Portable Charger Power Bank Safety Hammer LED Flashlight

Xincol EPS 600A Chargeable Portable Power Bank and Car Jump Starter with LED lights ,safety hammer,micro-sized battery packs, powerful enough to jolt your car back to life.

Share

2016 New Ungraded Xincol EPS  Multi-function Car Jump Starter Battery Booster with Portable Charger Power Bank Safety Hammer LED Flashlight

 

Note:

This Emergency Jump starter can be made up to capacity ,the real capacity of this jump starter actually is 10000mah.
Due to the limited volume, in fact, 12000mah is the largest, more than 12000mah is impossible. But the label will be marked with 16800 mAh.(the same version will be found marked with 50800mah in market)Please know it in advance before your order. Thank you.
Specification
Battery capacity: 10000mAh (being labeled 16800mah) and 12000mAh(labeled 18800mah) options available. 

LED illumination light12V / 16V / 19V voltage output indicator lights12V / 16V / 19V — 2A / 3A / 3.5A outputElectrical quantity indicator light.Key switch.USB 5V – 2A output15V – 1A charge inputMaster switchSize:165*79*40

Used For:

Car, mobile phone, PSP, MP3/MP4/MP5,Tablet PC, PDA,Camera etc.

1: Car emergency start charging,Enhanced 12V Petrol Version.Petrol Car Generic Version.

2: Mobile phone&Digital Product Charging

3:SOS Flashlight

Three color: yellow, red and green

Item Image
DSC_0140 DSC_0145 DSC_0146 DSC_0148 DSC_0155 DSC_0156 DSC_0161 DSC_0162 DSC_0169 DSC_0170 DSC_0178
DSC_0093 DSC_0106 DSC_0284
 DSC_0042 DSC_0044 DSC_0230DSC_0011 DSC_0009 DSC_0209

 

 

Car charger plug standards(Optional)

  acpl 

Operation Instructions for Staring Car Engine:

1.Before start the car,please make sure the hose minimum 3 LED indicated light on,then connect the blue plug fully seated into the host socket, and confirm the cable indicator is off.

2.Connecting the Red clip to the positive(+)battery terminal, Black clip to the negative(-)battery terminal.

3.Starting the vehicle.

4.When the vehicles starts, please make sure pull up the clamp cable from power bank and then from the car battery  . Please do not connect the red and black clip to the vehicle battery terminals more than 30s.

       

Instructions for use:

1.Select the appropriate voltage and connector for the electronic device to charge / power supply
2. Press the switch to start charging when your device connected with xincol jump starter; If you unplug the cable, auto-sleep will start in one minute.
3.Five lights will flash circularly during the charging by car jump starter and all lights will keep bright when your device is full-charged.
4. During the charging for your device, LED lights indicate the balance power of built-in battery of the starter. Four lights indicate 80% balance, three lights indicate 60% balance, two lights indicate 40% balance and one light indicates 20% balance. The built-in battery is empty when all LED lights start to flash.
5.Press the switch five seconds to start If you want to use LED for illumination and select the status ( light, strobe, SOS, close) by pressing the switch to transform.
6.Store the product in a cool and dry place and away direct sunlight.

03                             

Package includes:

1 x Power Bank XM
1 x Wall Power adapter
1 x Cigarette lighter charging adapter
1 x Cable
8 x Connectors for Laptops
1 x Four-in-one mobile phone adapter cable
1 x Set of startup clamp wire
1 x Carrying bag
1 x User manual

 

          

Share

Your Name (required)

Your Email (required)

Subject

Your Message

One Response to XINCOL EPS Multi-function Car Jump Starter Battery Booster with Portable Charger Power Bank Safety Hammer LED Flashlight
  1. Well I truly liked reading it. This tip procured by you is very constructive for accurate planning.


[top]

Leave a Reply

Your email address will not be published.

Scan Wechat
Skype Me
Call me!